KAMA DIE CUTTING AND FOIL/ EMBOSSING MACHINE, MODEL TS 74-60, 2006 YEAR, 29 X 23 INCH (73 X 58 CM), LIQUIDATION SALE, APPROXIMATELY 9495 HOURS AND 233 IMP, 10 APPLICATIONS WITH 1 MACHINE, DIE CUTTING, CREASING, SCORING, PERFORATING, BLIND EMBOSSING, BRAILLE EMBOSSING, KISS-CUTTING, HOT FOIL STAMPING ALSO COMBINED WITH EMBOSSING, APPLICATION OF REGISTERED HOLOGRAMS, CUTTING AND CREASING OF PLASTICS WITH HEATED RULES (HOT-CUT OPTION), FINE DIE CUTTING AND KISS-CUTTING OF CONTOURS WITH A MAGNETIC CUTTING PLATE, ELECTRONIC DOUBLE SHEET DETECTION, MAIN DRIVE WITH SERVO MOTOR FOR HIGHER PERFORMANCE, WITH HOT FOIL STAMPING UP TO 50 % FASTER, HOT FOIL STAMPING MODULE AND HOLOGRAM APPLICATION SYSTEM WITH 2 OR 3 FOIL FEEDERS, AUTO REGISTER FOR FINISHING DIGITALLY, PRINTED OR CUT SHEETS WITH HIGHEST ACCURACY (± 0.1 MM), VERY FAST CHANGEOVER FROM HOT FOIL STAMPING TO CUTTING/CREASING, NETWORK INTEGRATION AND REMOTE MAINTENANCE, DETAILS ON REQUEST
KLUGE FOIL STAMPER, 14 X 22, DOUBLE FLYWHEEL, USA LOCATION, DETAILS ON REQUEST, $22,000
KLUGE EHD DIE CUTTER / FOIL STAMPER, 14 X 22, HEATERS, CHASES, PARTS, FITTED WITH ADJUSTABLE ARMS, USA LOCATION, DETAILS / PICTURES ON REQUEST, $8,500
KLUGE 14 X 22 EHD DIE CUT/ FOIL PRESS, NICE CONDITION, CLEAN, WESTERN USA LOCATION, DETAILS ON REQUEST
KLUGE 52 EHD DIE CUTTER WITH FOIL, 14 X 20, DOUBLE FLYWHEEL, 147571G, RE-CONDITIONED DRIVE MOTOR, NEW FOIL DRAW CHAINS, NEW HEAT SENSORS, (NO MERCURY SENSORS), VEINS REPLACED ON PUMP, DRIVE BELT REPLACED, 1 ALUMINUM HONEYCOMB, 1 STEEL HONEYCOMB, 2 OPEN CHASES ETC., WORK CABINET WITH MANY ITEMS: TOGGLES, KEY SUCKERS, ETC. ROLLS OF FOIL, 60 GALLON AIR COMPRESSOR, DETAILS ON REQUEST, $22,000
BOBST SPANTHERA 106 LER DIE CUTTER, 2005 MODEL, APPROX. 15,500 RUNNING HOURS (TO BE CONFIRMED), NON-STOP FEEDER, SUCTION UNIT WITH VERTICAL MOTORIZED ADJUSTMENT, SUCTION UNIT WITH VERTICAL MOTORIZED ADJUSTMENT FOR TRANSPORTATION SUCKERS, 1-UPPER CHASE WITH QUICK LOCK, FIXED BOTTOM PLATE, 1-COMPENSATING PLATE, 1 – 4 MM CUTTING PLATE, MICROMETRIC ADJUSTING FOR THIN PLATES, EASYTRANSFER DEVICE, CHASE CHANGER, DETAILS ON REQUEST
BOBST SP 102 E-II DIE CUTTER, 2002 MODEL, MAX. SHEET…..40 1/8” X 28 3/8”, MIN. SHEET…..15 ¾” X 13 ¾”, IMPRESSIONAL STRENGTH…..275 US TONS, MAX. SPEED…..7,500 SPH, APPROXIMATELY 6,045 RUNNING HOURS, CUBE ELECTRONIC CONTROL SYSTEM, SMALL SHEET ATTACHMENT TO RUN 14” X 20”, DIRECT NON-STOP FEEDER, 2-CUTTING CHASES, 1-4 MM CUTTING PLATE, MICROMETRIC ADJUSTING FOR 1MM CUTTING PLATES, SMALL SUPPLY OF NEW AND USED 1 MM PLATES.CENTERLINE, OS SIDE GUIDE, OOS SIDE GUIDE (TO BE CONFIRMED), 1-SET OF UPPER AND LOWER STRIPPING FRAMES, LARGE QUANTITY OF STRIPPING PINS AND BARS, NON-STOP DELIVERY WITH RACK, REGISTRATION WITHIN FACTORY SPECIFICATIONS, ALL DOCUMENTATION, VERY CLEAN AND IN VERY GOOD CONDITION, DETAILS ON REQUEST
BRAUSSE 1050 SE DIE CUTTER, 2016 MODEL, STRIPPING, MAX SHEET SIZE 29 1/2 X 41 1/8 INCHES, MIN SHEET SIZE 15 ¾ X 14 ½, MAX SHEET SIZE 1050 X 750 MM, MIN SHEET SIZE 400 X 370 MM, 11,000 APPROXIMATE HOURS, IN PRODUCTION, USA LOCATION, NICE CONDITION, IN PRINT SHOP FOR INSPECTION, PICTURES / DETAILS ON REQUEST, NEED TO MOVE / ANXIOUS TO SELL
BRAUSSE 1050 FH AUTO DIE CUTTER, FOIL, HOLOGRAM STAMPING, 12 HEATING ZONES, 2011 MODEL, APPROXIMATELY 33,300 RUNNING HOURS, WELL EQUIPPED, VERY NICE CONDITION, FULL SPECS ON REQUEST
CROSLAND AVOPLATEN 29 CLAM SHELL DIE CUTTER, 42″, 1988, COBRA FOILTRAX FOILER, USA LOCATION, DETAILS ON REQUEST
IBERICA JR 105 D, 29 X 41, 1998 MODEL, APPROXIMATELY 30,400 RUNNING HOURS, PUSH GUIDE FOR CORRUGATED OOS, PULL GUIDE OS, PRE-PILE IN FEEDER, MANUAL NON-STOP FEEDER, 5-CUTTING PLATES, 5-COMPENSATING PLATES, 1-SET OF UPPER AND LOWER STRIPPING FRAMES, ASSORTMENT OF STRIPPING PINS AND BARS, NON-STOP DELIVERY, DETAILS ON REQUEST, AS-IS / WHERE IS $21,000 / LOADED-DISMANTLED PRICE $38,000
SANWA TRP 1060 SEE II DIE CUTTER, 2007 MODEL, MAXIMUM SHEET 732” X 29.133” , MINIMUM SHEET 748” X 13.000”, MAXIMUM CUTTING AREA 338” X 28.937”, MAXIMUM PLATEN CUTTING PRESSURE 300 TONS, MATERIAL RANGES .004” PAPER TO .060” BOARD, CORRUGATED “B” FLUTE, MAXIMUM SPEED 7,000 SPH, 2 CUTTING CHASES, 4 CUTTING PLATES, 2 SETS OF STRIPPING FRAMES, ALL STRIPPING PINS AND BARS, PUSH/PULL SIDE GUIDES ON BOTH SIDES OF PLATEN INLET, CENTERLINE SYSTEM, OPERATOR’S PLATFORM, ALL DOCUMENTATION AND SPARE PARTS, DETAILS ON REQUEST
NIKKO HOT STAR 105 DIE CUTTER FOIL STAMPER, GOOD CONDITION, DETAILS ON REQUEST
ACER RUAN AEM 800 DIE CUTTER, 2017 MODEL, 23 X 30 MAX, UP TO .32 THICKNESS, 200 TON, 6,500 SHEETS PER HOUR, NO STRIPPING, 2 CHASES, ONE COUNTER PLATE FOR 1 MM PLATE SYSTEMS, 380 VOLTS / 40 AMP (NO TRANSFORMER CONVEYS WITH PURCHASES, APPROXIMATELY 12,644 HOURS, ELECTRICAL SPEC SHEET / PICTURES ON REQUEST
BOBST SP 130 ER-II DIE CUTTER, 1998, RUNNING HOURS APPROXIMATELY 59,400, PULL GUIDE OS, MICROMETRIC ADJUST, CENTER LINE, NON-STOP FEEDER, BERNOULLI SYSTEM DIRECTLY AFTER PLATEN AND STRIPPING SECTION, 4-CUTTING CHASE, 6 CUTTING PLATES (2-5 MM, 3-4MM, 1-3.5 MM), 4-STRIPPING FRAMES, 4 STANDARD BLANKING FRAMES, 1-BSI LOWER BLANKING FRAME, ELEVATED MACHINE, DETAILS ON REQUEST
MARKMASTER STAMPING MACHINE, STILL IN CRATE, NEVER USED, DETAILS ON REQUEST
STEUER PZ 82 (SBB) HOT FOIL STAMPING MACHINE, AGE: 1999, AVAILABLE NOW, SHEET SIZE MAX.: 570X820 MM, SHEET SIZE MIN.: 210X280 MM, FOILING AREA MAX.: 540X772 MM, STOCK: MAX. 0,75 MM, MECH. SPEED: UP TO 3.600 SHEETS/H., HEIGHT OF CUTTING PLATES: 7 MM, STAMPING DIE HEIGHT: STANDARD 7 MM, STAMPING SPEED: 600 – 3600 SHEETS/H, PILE HEIGHT FEEDER: 340 MM, HS CODE: 84439959 HS CODES CLASSIFICATION OF OTHER, 4 FOIL PULLS, SPM STEUER PANEL WITH INDIVIDUALLY PROGRAM, 2 HONEYCOMB CHASES, HEIGHT-ADJUSTABLE FORMBED, PRE-PILE DEVICE FOR FEEDER, BASED ON HEIDELBERG LETTERPRESS SBB, DETAILS ON REQUEST
DIE STAR DGM AUTOMATIC DIE CUTTER WITH STRIPPING, 2006 MODEL, HIGH PILE, NON STOP FEEDER AND DELIVERY, MODEL 1050 S, SIZE 29 X 41″, MAX SPEED 7500S/HR, POWER 20 KW, MAX PRESSURE 300 TONS, DIMENSION 23’L X 12’W X 7’H, GOOD WORKING CONDITION, UNDER POWER CAN BE SEE RUNNING, USA LOCATION, DETAILS ON REQUEST
IJIMA BFP 1000 S AUTOPLATEN DIE CUTTER, 28 X 40, 1000 X 700 MM, MABEG NON-STOP, DETAILS ON REQUEST
KOPPERS ROTARY DIE CUTTER, SINGLE COLOR, 66 X 110, IN PRODUCTION, WILL BE RELEASED AFTER NEW MACHINE IS INSTALLED, USA LOCATION, DETAILS ON REQUEST
HEIER FLAT BED DIE CUTTER, 80 INCH, NOT IN PRODUCTION, USED ONE TIME FOR ONE JOB, REPLACED BY ROTARY CUTTER, USA LOCATION, VIDEO/PICTURES ON REQUEST
BOBST PRE SET TABLES FOR BOBST DIE CUTTERS, DETAILS ON REQUEST
SAME PLANT:
YAWA MODEL TD 1060 S DIE CUTTER, 29” X 41.7”, 2021 MODEL, STRIPPING, UNDER POWER, AVAILABLE IMMEDIATELY (LESS THAN TWO YEARS OLD), DETAILS ON REQUEST
YAWA MODEL TD 1060 S DIE CUTTER, 29″ X 41.7″, 2021 MODEL, STRIPPING, IN ORIGINAL SHIPPING CRATE, OWNER CHANGED BUSINESS DIRECTION, NEVER UNDER POWER, DETAILS ON REQUEST
918-451-3023 – PHONE
918-284-6766 – CELL / WHATSAPP